視像


Eddy Bottles Overview



Lab 5: Bottle Durability



You've got your back

eddy™ Kids 兒童瓶 .4L
[EDDYKIDS04L]

現有存貨:

$150.00

兒童裝水樽既可愛又安全,全無BPA塑膠成份,專為小童設計的吸管更容易使用及拆除清洗,可令小孩健康地保充水份。

請選擇:

Color for eddy™ Kids .4L: 53187 Blue - 暫時沒有存貨
53185 Berry/Pink
1274111040 Sports Jam
1274413040 Glitter Rainbows
54101 Lilac
1274001040 UFOs
1274104040 Clear
1274610040 Unicorn Party
  
    0 評論  |  寫評論

商品特點


- 只需一按按鈕,防漏樽蓋立即打開,方便容易,適合小童幼小的手指頭
- 簡單的吸管設計既安全又容易清洗
- 適合三歲以上兒童使用
- 全無BPA塑膠成份,樽身有防污漬設計,亦有Taste-Free Tritan™保證,令儲存在水樽的水更清新,不帶任何水以外的味道
- 水樽的大小及圖案專為兒童設計,方便攜帶
- Camelbak® Got Your Bak™ 保養:一世保養,安心使用


商品護理

CLEANING THE EDDY KIDS BOTTLE

We can't offer up the bottle cleaning equivalent to the five-second rule, you just gotta do it. It won't take long, and your kids will be eternally grateful.

We recommend first removing your one-piece bite valve and straw for cleaning. It's easy to do. (Yes, it looks like a lot of steps here, but it really is easy):

1. Flip the stem to the open position by pulling on stem tab.
2. Turn cap over and pull out the straw.
3. Grab the flat finger tab on the base of the Big Bite Valve under the cap.
4. In one firm motion, pull the Big Bite Valve component out of the cap.
5. Clean the bite valve and cap by hand or in the top rack of a dishwasher.

If you use a dishwasher, a top-rack basket for small parts is ideal, and it's good to avoid high-heat settings like 'sanitary clean' or 'heat boost' which may distort plastic components.

If you clean by hand, use warm, soapy water.

If you like to use a bottle brush, make sure it doesn't have exposed metal edges that could cut the silicone, then insert the brush into the open end at the base of the valve. We don't recommend forcing a brush of any kind through the Big Bite Valve slit (where you drink from) as this could damage the sealing surfaces of the Big Bite Valve.

To re-insert the bite valve back into the cap:

1. Flip the stem collar (the component the bite valve passed through originally) to the open position. You should be able to look through both the opening in the cap and the opening in the collar.
2. Turn the cap over and orient the bite valve so the finger tab points towards the back of the cap (where the handle loop is).
3. Insert the tip of the bite valve through the cap and the collar until the end of the Big Bite Valve peeks through the outer end of the collar.
4. Turn the cap over and grab the end of the Big Bite Valve and pull through until it sits in the grooves incorporated into the collar. If you pull the Big Bite Valve too far out these grooves will be visible. Just press the valve back down until these grooves are seated.
5. Turn the cap over and press on the base of the valve to make sure it is seated.
6. Insert the straw (either end it doesn't matter) into the hole in the valve base. Don't over-insert the straw just until you feel resistance.


常見問題

1. How do I put the Big Bite™ Valve back in the cap?

Follow these instructions to re-insert the Big Bite™ Valve component:

a. Flip the stem collar (the component the bite valve passed through originally) to the open position. You should be able to look through both the opening in the cap and the opening in the collar.
b. Turn the cap over and orient the bite valve so the finger tab points towards the back of the cap (where the handle loop is). Insert the tip of the bite valve through the cap and the collar until the end of the Big Bite™ Valve peeks through the outer end of the collar.
c. Turn the cap over and grab the end of the Big Bite™ Valve and pull through until it sits in the grooves incorporated into the collar. If you pull the Big Bite™ Valve too far out these grooves will be visible. Just press the valve back down until these grooves are seated.
d. Turn the cap over and press on the base of the valve to make sure it is seated.
e. Insert the straw (either end, it doesn't matter) into the hole in the valve base. Don't over-insert the straw, just until you feel resistance.

2. Can I use a bottle brush on the Big Bite™ Valve?

Yes. The Big Bite™ Valve is made from tough silicone material that can be cleaned with a bottle brush similar to those designed for baby bottle nipples. Make sure the brush doesn't have exposed metal edges that could cut the silicone. Then insert the brush into the open end at the base of the valve. We don't recommend forcing a brush of any kind through the Big Bite™ Valve slit (where you drink from) as this could damage the sealing surfaces of the Big Bite™ Valve.

3. How is the eddy™ Kids Bottle cap different from the regular CamelBak eddy™ cap? The eddy™ Kids Bottle and eddy™ both feature the easy-to-use, spill-proof Big Bite™ Valve technology, a convenient straw-feed format, and flip-close-to-shutoff stem configuration. The eddy™ Kids Bottle cap, however, features a Kids'-specific Big Bite™ Valve and stem design made from a single piece of medical grade silicone. This one-piece construction prevents a child from pulling the bite valve off accidentally, but makes it easy for a parent to remove and place in the dishwasher for cleaning.

4. Can I use carbonated beverages?

We do not recommend the use of carbonated beverages in the CamelBak™ Kids' Bottle. Because of the spill-proof sealed construction of the bottle, carbonated beverages can cause pressure build-up that while not dangerous, can result in an experience like opening a shaken-up can of soda. To use with carbonated beverages, we recommend that you remove the straw and drink using the “tip and sip” method like an ordinary sippy cup.

5. Can I freeze the bottle?

You can freeze the bottle but make sure:

a. The bottle is not completely full when you do this (we recommend only 3/4 full to allow for expansion of the water as it freezes to ice).
b. The bottle is right side up

We also recommend that the bite valve stem NOT be flipped up or down if there is any frozen water in the tube. Wait until thawed.

6. Can I use the CamelBak™ eddy™ Kids Bottle in high-altitude/ low-pressure environments? (i.e. airplanes, mountain altitudes, etc)

Yes, but with extra care because pressure can force liquid out throuth the straw. Always keep the bottle right side up and the bite valve in the closed position. Remove the straw for additional protection. Expect a bit of “spurt” during the first sip.

 相關貨品